{"id":5982,"date":"2018-03-07T12:10:13","date_gmt":"2018-03-07T10:10:13","guid":{"rendered":"https:\/\/contabo.com\/blog\/?p=5982"},"modified":"2025-05-23T15:13:34","modified_gmt":"2025-05-23T13:13:34","slug":"raid-controller-administrieren-unter-linux","status":"publish","type":"post","link":"https:\/\/contabo.com\/blog\/de\/raid-controller-administrieren-unter-linux\/","title":{"rendered":"RAID-Controller administrieren unter Linux"},"content":{"rendered":"<p>Wichtige Information vorab: Dieses Tutorial befasst sich mit Linux. Sollten Sie stattdessen Windows verwenden, schauen Sie bitte in unser entsprechendes Tutorial zur <a href=\"https:\/\/contabo.de\/?show=tutorials&amp;tutorial=raid-controller-administrieren-unter-windows\" target=\"_blank\" rel=\"noopener noreferrer nofollow\">RAID-Controller Administration unter Windows<\/a>.<\/p>\n<p><strong>\u00dcberwachung eines RAID Arrays<\/strong><\/p>\n<p>Ein Hardware RAID hat bestimmte Vorz\u00fcge, aber auch ein Hardware RAID muss regelm\u00e4\u00dfig \u00fcberpr\u00fcft werden. Wir setzen stets auf bew\u00e4hrte Markenhardware, um Defekte m\u00f6glichst auszuschlie\u00dfen. Es besteht jedoch immer ein bestimmtes Restrisiko, einen Festplattenausfall kann man nicht immer vorhersagen oder gar verhindern. Es ist daher wichtig, auch funktionierende Hardware kritisch zu \u00fcberwachen.<\/p>\n<p>Bei einem Software RAID generiert das Betriebssystem Meldungen \u00fcber das RAID, bei einem Hardware RAID macht das der Controller selbst &#8211; man ben\u00f6tigt jedoch eine spezielle Software um diese Meldungen auszulesen.<\/p>\n<p>Dieser Blogeintrag zeigt die Installation und Nutzung der Software f\u00fcr Adaptec und LSI Controller auf Linux Betriebssystemen.<br \/>\nF\u00fcr die Verwaltung von RAID-Controllern stehen ebenfalls grafische Oberfl\u00e4chen zur Verf\u00fcgung &#8211; bspw. ein Webinterface.<\/p>\n<p><strong> Falls Sie nicht genau wissen welcher RAID-Controller verbaut ist, kontaktieren Sie bitte unseren <a href=\"https:\/\/contabo.de\/?show=kundenservice\" target=\"_blank\" rel=\"noopener noreferrer nofollow\">Support<\/a> per E-Mail. <\/strong><\/p>\n<p><span style=\"color: #ff0000;\">Bitte installieren Sie keine neue Firmware auf dem Controller oder Treiber im Betriebssystem &#8211; das kann unter Umst\u00e4nden zu einem kompletten Datenverlust f\u00fchren!<\/span><\/p>\n<p>In diesem Tutorial werden zus\u00e4tzliche Software-Tools benutzt, zur Vorbereitung des Betriebssystems (in unserem Fall Ubuntu 17.10) installieren Sie diese mit &#8222;apt install zip unzip net-tools&#8220;<\/p>\n<h3 id=\"Linux1\"><strong>1. Adaptec<\/strong><\/h3>\n<p>Eine \u00dcbersicht der verf\u00fcgbaren Adaptec Software findet man unter <a href=\"https:\/\/storage.microsemi.com\/en-us\/support\/series6\/index.php\" rel=\"nofollow\">https:\/\/storage.microsemi.com\/en-us\/support\/series6\/index.php<\/a><\/p>\n<h4 id=\"Linux11\">1.1 Installation des arcconf Binary<\/h4>\n<p>Das &#8222;arcconf&#8220; Binary kann unter Linux sehr einfach installiert werden. \u00dcber die Linux Commandline kann man den RAID-Controller dann verwalten.<\/p>\n<p>Sollten Sie sich nicht sicher sein, ob Ihr Benutzer \u00fcber die notwendigen Rechte verf\u00fcgt, k\u00f6nnen Sie zu Beginn einer jeden SSH-Session das folgende Kommando ausf\u00fchren:<\/p>\n<p><code>sudo -i<\/code><\/p>\n<p>Nach Ausf\u00fchrung des Kommandos erhalten Sie weiterf\u00fchrende (Root-) Berechtigungen ohne das Kommando &#8222;sudo&#8220; jedem Befehl auf der Kommandozeile voranstellen zu m\u00fcssen.<\/p>\n<p>Zun\u00e4chst wird das Binary heruntergeladen, dieses befindet sich im Men\u00fc &#8222;Storage Manager Downloads&#8220; auf der oben genannten Webseite des Herstellers.<br \/>\nGenerell ist das &#8222;arcconf&#8220; Binary bei allen Adaptec RAID-Controllern identisch. F\u00fcr unseren Testserver laden wir folgendes Binary herunter: <a href=\"https:\/\/storage.microsemi.com\/en-us\/speed\/raid\/storage_manager\/arcconf_v2_03_22476_zip.php\" rel=\"nofollow\">https:\/\/storage.microsemi.com\/en-us\/speed\/raid\/storage_manager\/arcconf_v2_03_22476_zip.php<\/a><\/p>\n<p><code>wget http:\/\/download.adaptec.com\/raid\/storage_manager\/arcconf_v2_03_22476.zip &amp;&amp; unzip arcconf_v2_03_22476.zip<\/code><\/p>\n<p>Nun verschieben wir das entsprechende Binary und machen dieses ausf\u00fchrbar:<\/p>\n<p><code>mv linux_x64\/cmdline\/arcconf \/usr\/sbin\/ &amp;&amp; chmod +x \/usr\/sbin\/arcconf<\/code><\/p>\n<p>Man hat nun den Befehl &#8222;arcconf&#8220; zur Verf\u00fcgung und kann diesen jederzeit nutzen.<\/p>\n<p><code>root@contabo:~# arcconf<\/code><\/p>\n<p><code><br \/>\nControllers found: 1<br \/>\n| UCLI |&nbsp; Adaptec by PMC uniform command line interface<br \/>\n| UCLI |&nbsp; Version 2.03 (B22476)<br \/>\n| UCLI |&nbsp; (C) Adaptec by PMCS 2003-2016<br \/>\n| UCLI |&nbsp; All Rights Reserved<\/code><\/p>\n<h4 id=\"Linux12\">1.2 \u00dcberwachung des RAID Controllers<\/h4>\n<p>Im Normalfall wird das RAID als &#8222;OPTIMAL&#8220; angezeigt, falls eine Festplatte ausf\u00e4llt ert\u00f6nt automatisch ein akustisches Signal. Dieses Signal wird von unseren Technikern im Rechenzentrum wahrgenommen. In einem solchen Fall informieren wir Sie \u00fcber den Alarm.<\/p>\n<p>Mit den Parametern &#8222;arcconf GETCONFIG 1&#8220; bekommt man s\u00e4mtliche Daten vom 1. Controller der erkannt wurde. Falls mehr als ein Controller verbaut wurde, kann man den zweiten mit &#8222;arcconf GETCONFIG 2&#8220; ansteuern.<\/p>\n<p>Eine \u00dcbersicht der Optionen bekommt man mit dem Befehl &#8222;arcconf getconfig&#8220; aufgelistet.<\/p>\n<p>Die wichtigsten Status kann man mit &#8222;arcconf getconfig 1 | grep Status&#8220; auflisten.<\/p>\n<p><code>root@contabo:~# arcconf getconfig 1 | grep Status<\/code><\/p>\n<p><code><br \/>\nController Status&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Optimal<br \/>\nStatus&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : ZMM not installed<br \/>\nStatus of Logical Device&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : <strong>Optimal<\/strong><\/code><\/p>\n<p>&#8222;ZMM not installed&#8220; signalisiert, dass keine BBU (Battery Backup Unit) vorhanden ist, eine BBU kann selbstverst\u00e4ndlich auch nachtr\u00e4glich bestellt werden.<\/p>\n<p>Eine ausgefallene Festplatte erkannt man am &#8222;Degraded&#8220;.<br \/>\n<code><br \/>\nroot@contabo:~# arcconf getconfig 1 | grep Status<\/code><\/p>\n<p><code><br \/>\nController Status&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Optimal<br \/>\nStatus&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : ZMM not installed<br \/>\nStatus of Logical Device&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : <strong>Degraded<\/strong><\/code><\/p>\n<p>Die defekte Festplatte (in unserem Fall ist es eine SSD) findet man mit folgendem Befehl:<\/p>\n<p><code>root@contabo:~# arcconf getconfig 1 PD<\/code><\/p>\n<p><code><br \/>\nControllers found: 1<br \/>\n----------------------------------------------------------------------<br \/>\nPhysical Device information<br \/>\n----------------------------------------------------------------------<br \/>\nDevice #0<br \/>\nDevice is a Hard drive<br \/>\nState&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Failed<br \/>\nBlock Size&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : 512 Bytes<br \/>\nFailed logical device segments&nbsp;&nbsp;&nbsp;&nbsp; : True<br \/>\nSupported&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Yes<br \/>\nTransfer Speed&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Failed<br \/>\nReported Channel,Device(T:L)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : 0,0(0:0)<br \/>\nReported Location&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Connector 0, Device 0<br \/>\nVendor&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; :<br \/>\nModel&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Crucial_CT275MX3<br \/>\nFirmware&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; :&nbsp; M0CR040<br \/>\nSerial number&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : 11111111111111<br \/>\nWorld-wide name&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : 500A075116639956<br \/>\nTotal Size&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : 262321 MB<br \/>\nWrite Cache&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Enabled (write-back)<br \/>\nFRU&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : None<br \/>\nS.M.A.R.T.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : No<br \/>\nS.M.A.R.T. warnings&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : 0<br \/>\nPower State&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Full rpm<br \/>\nSupported Power States&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Full power,Powered off,Standby<br \/>\nSSD&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Yes<br \/>\nTemperature&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Not Supported<br \/>\nNCQ status&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Enabled<\/code><\/p>\n<p>Um die Festplatte auszutauschen, ben\u00f6tigt unser Support die entsprechende Seriennummer und den Port. Der Port entspricht der Device ID, in diesem Fall ist es Port 0.<\/p>\n<p>Sobald die Festplatte getauscht wurde, beginnt der Rebuild.<\/p>\n<p><code>root@contabo:~# arcconf getconfig 1 | grep Status<\/code><\/p>\n<p><code><br \/>\nController Status&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Optimal<br \/>\nStatus&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : ZMM not installed<br \/>\nStatus of Logical Device&nbsp; : <strong>Degraded, Rebuilding ( Rebuild : 1 % )<\/strong><\/code><\/p>\n<p>Je nach RAID Setup kann dies einige Stunden dauern.<\/p>\n<h4 id=\"Linux13\">1.3 Installation des Webinterface<\/h4>\n<p>Hierf\u00fcr muss der MaxView Storage Manager heruntergeladen werden, der Download f\u00fcr Linux befindet sich unter <a href=\"https:\/\/storage.microsemi.com\/de-de\/speed\/raid\/storage_manager\/msm_linux_x64_v2_03_22476_tgz.php\" rel=\"nofollow\">https:\/\/storage.microsemi.com\/de-de\/speed\/raid\/storage_manager\/msm_linux_x64_v2_03_22476_tgz.php<\/a><\/p>\n<p><code>wget http:\/\/download.adaptec.com\/raid\/storage_manager\/msm_linux_x64_v2_03_22476.tgz &amp;&amp; tar -xzf msm_linux_x64_v2_03_22476.tgz<\/code><\/p>\n<p>Es wird ein Ordner &#8222;manager&#8220; angelegt, in diesem befinden sich die Installer.<br \/>\nAuf dem f\u00fcr das Testsystem genutzte Betriebssystem (Ubuntu 17.04) f\u00fchren wir folgenden Befehl aus:<\/p>\n<p><code>dpkg -i manager\/StorMan-2.03-22476_amd64.deb<\/code><\/p>\n<p>Anschlie\u00dfend ist das Webinterface unter <strong>https:\/\/&lt;SERVERIP&gt;:8443<\/strong> erreichbar.<\/p>\n<h3 id=\"Linux2\"><strong>2. LSI<\/strong><\/h3>\n<h4 id=\"Linux21\">2.1 Installation des StorCLI Binary<\/h4>\n<p><a href=\"https:\/\/docs.broadcom.com\/docs\/12351351\" rel=\"nofollow\">Download des Commandline Binary<\/a> :<\/p>\n<p><code>wget https:\/\/docs.broadcom.com\/docs-and-downloads\/raid-controllers\/raid-controllers-common-files\/1.21.16_StorCLI.zip --no-check-certificate &amp;&amp; unzip 1.21.16_StorCLI.zip &amp;&amp; cd versionChangeSet\/univ_viva_cli_rel\/ &amp;&amp; unzip storcli_All_OS.zip<br \/>\n<\/code><code><br \/>\ndpkg -i storcli_All_OS\/Ubuntu\/storcli_1.21.06_all.deb<br \/>\nln -s \/opt\/MegaRAID\/storcli\/storcli64&nbsp; \/usr\/sbin\/storcli<\/code><\/p>\n<h4 id=\"Linux22\">2.2 \u00dcberwachung des Raidcontrollers<\/h4>\n<p>Anschlie\u00dfend kann man mit dem Befehl<\/p>\n<p><code>root@contabo:~#storcli \/c0 show<\/code><\/p>\n<p>den Status des RAID-Controllers anzeigen lassen.<\/p>\n<p><code>TOPOLOGY :<br \/>\n========<br \/>\n-----------------------------------------------------------------------------<br \/>\nDG Arr Row EID:Slot DID Type&nbsp; State BT&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Size PDC&nbsp; PI SED DS3&nbsp; FSpace<br \/>\n-----------------------------------------------------------------------------<br \/>\n0 -&nbsp;&nbsp; -&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; RAID1 <strong>Optl&nbsp; <\/strong>N&nbsp; 255.656 GB dflt N&nbsp; N&nbsp;&nbsp; dflt N<br \/>\n0 0&nbsp;&nbsp; -&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; RAID1 <strong>Optl&nbsp; <\/strong>N&nbsp; 255.656 GB dflt N&nbsp; N&nbsp;&nbsp; dflt N<br \/>\n0 0&nbsp;&nbsp; 0&nbsp;&nbsp; 64:4&nbsp;&nbsp;&nbsp;&nbsp; 12&nbsp; DRIVE <strong>Onln&nbsp; <\/strong>N&nbsp; 255.656 GB dflt N&nbsp; N&nbsp;&nbsp; dflt -<br \/>\n0 0&nbsp;&nbsp; 1&nbsp;&nbsp; 64:5&nbsp;&nbsp;&nbsp;&nbsp; 13&nbsp; DRIVE <strong>Onln&nbsp; <\/strong>N&nbsp; 255.656 GB dflt N&nbsp; N&nbsp;&nbsp; dflt -<br \/>\n----------------------------------------------------------------------------<br \/>\n<\/code><br \/>\nBeispiel einer ausgefallenen HDD:<\/p>\n<p><code>TOPOLOGY :<br \/>\n========<br \/>\n----------------------------------------------------------------------<br \/>\nDG Arr Row EID:Slot DID Type&nbsp; State BT Size PDC&nbsp; PI SED DS3&nbsp; FSpace<br \/>\n----------------------------------------------------------------------<br \/>\n0 -&nbsp;&nbsp; -&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; RAID1 <strong>Dgrd&nbsp; <\/strong>N&nbsp; 255 GB dflt N&nbsp; N&nbsp;&nbsp; dflt N<br \/>\n0 0&nbsp;&nbsp; -&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; RAID1 <strong>Dgrd&nbsp; <\/strong>N&nbsp; 255 GB dflt N&nbsp; N&nbsp;&nbsp; dflt N<br \/>\n0 0&nbsp;&nbsp; 0&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; -&nbsp;&nbsp; DRIVE <strong><span style=\"color: #ff0000;\">Msng&nbsp;<\/span> <\/strong>-&nbsp; 255 GB -&nbsp;&nbsp;&nbsp; -&nbsp; -&nbsp;&nbsp; -&nbsp;&nbsp;&nbsp; -<br \/>\n0 0&nbsp;&nbsp; 1&nbsp;&nbsp; 64:5&nbsp;&nbsp;&nbsp;&nbsp; 13&nbsp; DRIVE Onln&nbsp; N&nbsp; 255 GB dflt N&nbsp; N&nbsp;&nbsp; dflt -<br \/>\n---------------------------------------------------------------------<br \/>\n<\/code><br \/>\n<code>root@contabo:~#storcli \/c0 \/sall show<\/code><br \/>\n<code><br \/>\nController = 0<br \/>\nStatus = <strong>Failure<\/strong><br \/>\nDescription = No drive found!<br \/>\nDetailed Status :<br \/>\n===============<br \/>\n----------------------------------------<br \/>\nDrive&nbsp;&nbsp;&nbsp; Status&nbsp; ErrCd ErrMsg<br \/>\n----------------------------------------<br \/>\n\/c0\/sALL Failure&nbsp;&nbsp; 255 Drives not found<br \/>\n----------------------------------------<br \/>\n<\/code><br \/>\nDen Rebuild Status kann man mit folgendem Befehl anzeigen lassen:<\/p>\n<p><code>root@contabo:~#storcli \/c0 \/eall \/sall show rebuild<\/code><\/p>\n<p><code><br \/>\nController = 0<br \/>\nStatus = Success<br \/>\nDescription = Show Drive Rebuild Status Succeeded.<br \/>\n---------------------------------------------------------<br \/>\nDrive-ID&nbsp;&nbsp; Progress% Status&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Estimated Time Left<br \/>\n---------------------------------------------------------<br \/>\n\/c0\/e64\/s4&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0 In progress&nbsp;&nbsp;&nbsp;&nbsp; -<br \/>\n\/c0\/e64\/s5&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; - Not in progress -<br \/>\n---------------------------------------------------------<br \/>\n<\/code><\/p>\n<h4 id=\"Linux23\">2.3 Installation eines Webinterfaces<\/h4>\n<p>Ein Webinterface f\u00fcr Linux ist leider nicht verf\u00fcgbar.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Wichtige Information vorab: Dieses Tutorial befasst sich mit Linux. Sollten Sie stattdessen Windows verwenden, schauen Sie bitte in unser entsprechendes Tutorial zur RAID-Controller Administration unter Windows. \u00dcberwachung eines RAID Arrays Ein Hardware RAID hat bestimmte Vorz\u00fcge, aber auch ein Hardware RAID muss regelm\u00e4\u00dfig \u00fcberpr\u00fcft werden. Wir setzen stets auf bew\u00e4hrte Markenhardware, um Defekte m\u00f6glichst auszuschlie\u00dfen. [&hellip;]<\/p>\n","protected":false},"author":17,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"inline_featured_image":false,"_uag_custom_page_level_css":"","site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[1399],"tags":[51,56,181,510,522,677],"ppma_author":[1493],"class_list":["post-5982","post","type-post","status-publish","format-standard","hentry","category-tutorials","tag-adaptec","tag-administration","tag-contabo","tag-linux","tag-lsi","tag-raid"],"uagb_featured_image_src":{"full":false,"thumbnail":false,"medium":false,"medium_large":false,"large":false,"1536x1536":false,"2048x2048":false},"uagb_author_info":{"display_name":"Gianni-Donato","author_link":"https:\/\/contabo.com\/blog\/de\/author\/gianni-donato\/"},"uagb_comment_info":0,"uagb_excerpt":"Wichtige Information vorab: Dieses Tutorial befasst sich mit Linux. Sollten Sie stattdessen Windows verwenden, schauen Sie bitte in unser entsprechendes Tutorial zur RAID-Controller Administration unter Windows. \u00dcberwachung eines RAID Arrays Ein Hardware RAID hat bestimmte Vorz\u00fcge, aber auch ein Hardware RAID muss regelm\u00e4\u00dfig \u00fcberpr\u00fcft werden. Wir setzen stets auf bew\u00e4hrte Markenhardware, um Defekte m\u00f6glichst auszuschlie\u00dfen.&hellip;","authors":[{"term_id":1493,"user_id":17,"is_guest":0,"slug":"gianni-donato","display_name":"Gianni-Donato","avatar_url":"https:\/\/secure.gravatar.com\/avatar\/4457fc8553ead9a4e1e3d5b4a940590df9bad9d9132e58e40df3894b99bbe5d0?s=96&d=mm&r=g","0":null,"1":"","2":"","3":"","4":"","5":"","6":"","7":"","8":""}],"_links":{"self":[{"href":"https:\/\/contabo.com\/blog\/de\/wp-json\/wp\/v2\/posts\/5982","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/contabo.com\/blog\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/contabo.com\/blog\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/contabo.com\/blog\/de\/wp-json\/wp\/v2\/users\/17"}],"replies":[{"embeddable":true,"href":"https:\/\/contabo.com\/blog\/de\/wp-json\/wp\/v2\/comments?post=5982"}],"version-history":[{"count":2,"href":"https:\/\/contabo.com\/blog\/de\/wp-json\/wp\/v2\/posts\/5982\/revisions"}],"predecessor-version":[{"id":23706,"href":"https:\/\/contabo.com\/blog\/de\/wp-json\/wp\/v2\/posts\/5982\/revisions\/23706"}],"wp:attachment":[{"href":"https:\/\/contabo.com\/blog\/de\/wp-json\/wp\/v2\/media?parent=5982"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/contabo.com\/blog\/de\/wp-json\/wp\/v2\/categories?post=5982"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/contabo.com\/blog\/de\/wp-json\/wp\/v2\/tags?post=5982"},{"taxonomy":"author","embeddable":true,"href":"https:\/\/contabo.com\/blog\/de\/wp-json\/wp\/v2\/ppma_author?post=5982"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}